three-dimensional structure Sand Washing Machine(XSD series)

Characteristics : Reasonable structure,Large capacity,Low consumption,Little loss of the sand during the washing process,Low fai

       XSD Series Sand Washing Machine is a kind of wheeled washing equipment, and can clean and separate the dust and powder from the sand. Its new seal-structure and reliable driving device can make sure the cleaning effective and a kind of high efficiency sand washing equipment matched with the Sand Making Machine. Sand Washing Machine are mainly used in building site, gravel plant, concrete dam building site of hydropower station, etc., and with features of high degree cleaning-up, reasonable structure, large capacity, low power consumption, small loss of the sands during the washing process, especially for that the drive parts of the Sand Washing Machine are separated from water and sands. So that it has lower failure rate than the usual Sand Washing Machine

      Operating principle of Sand Washing Machine:

      The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.

Specification and Technical Parameter on XSD Series Sand Washer :

Model	XSD2610	XSD3016	XSD3620
Impeller Speed(mm)	2600	3000	3600
Feeding Size(mm)	≤10	≤10	≤10
Capacity (t/h)	20-50	50-80	80-150
Power (kw)	7.5	15	18.5
Weight (t)	2.68	3.26	4.3
Overall Dimensions (L×W×H)(mm)	3321×2312×2683	3830×2972×3200	4456×3479×3688

Specification and Technical Parameter on LSX Series Sand Washer :

Model	LSX-920	2LSX-920	LSX-1120	2LSX-1120
Number of Screw	1	2	1	2
Screw Diameter (mm)	920	920	1120	1120
Tub Length (mm)	7585	7585	9750	9750
Feeding Size (mm)	≤10	≤10	≤10	≤10
Capacity (t/h)	100	200	175	350
Screw Speed (r/min)	21	21	17	17
Required Power (kw)	11	11×2	18.5	18.5×2
Water Requirement (t/h)	10-80	20-160	20-150	40-300
Weight (t)	6.2	11.5	10.9	17.8

three-dimensional structure Sand Washing Machine(XSD series)