Supply Raymond grinding mill in USA

Raymond Mill in USA Features: 1.Three-dimensional structure 2. Land-saving 3. The screen-passing rate can reach to 99%

The Application of High Pressure Medium Speed Grinder:

High Pressure Medium Speed Grinder (High Pressure Suspension Mill), the new design, from VIPEAK is used to grind barite, limestone, kaolin, and ceramics and slag, whose Moh's hardness is below 9.3 scales, non-inflammable and non-explosive material.

 

Working Principle of High Pressure Medium Speed Grinder:

 The grinding Process of the Main Mill is that the transmission device brings along the Central Shaft to drive. The upper part of the shaft connects with the Quincunx Rack, on the frame is loaded with the roller assembly, and forms a swinging pivot. The central shaft does revolve around the central rotation, at the same time it revolves around the grinding rings, and it self also rotates on account of the grinding effect. The shovel system, in the lower part of rollers, is loaded on the lower part of the Quincunx Rack. In the process of rotating of the shovel and the roller, the material will be fed gasket layer between the rollers and ring. The outside centrifugal force (compression force) yielding in this process will process the material into small powder, thus the desired powder is obtained.

Raymond MillTechnical Parameter :             

Model	No. of Roller (Pcs)	Roller Diameter ×Height (mm)	Ring Inn Diameter ×Height (mm)	Max. Feeding Size (mm)	Fineness of finished product (mm)			Mainframe Power (KW)	Overall Dimension (L×W×H) (MM)
					0.125	0.075	0.044
					Capacity(t/h)
3R2115	3	210×150	630×150	<15	1.2-1.8	0.6-1.2	0.6-1.0	15	4500×2800×5800
3R2615	3	260×150	780×150	15-20	1.8-2.5	1.2-1.8	0.8-1.2	18.5	5650×3305×5950
3R2715	3	270×150	830×150	15-20	2.3-2.8	1.8-2.8	0.9-1.7	22	8000×3500×4900
3R3016	3	300×160	880×160	15-20	2.6-4	1.9-2.6	1.0-1.9	30	6500×4100×5200
4R3216	4	320×160	970×160	20-25	3.2-4.5	2.4-3.1	1.8-2.5	37	9900×5800×10580

Supply Raymond grinding mill in USA